You'll be ready to throw your Xbox out the window when you see the dreaded red ring of death. That insidious red ring is caused by an over heated motherboard. As it heats up and cools off, the motherboard flexes. That will cause the solder joint holding the Graphic Processing Unit (GPU) to crack and come loose. Once the GPU is disconnected, the red ring of death shows up.

There are several easy approaches to a so-called "3 red rings of death fix" which may be necessary for many Xbox 360 devices. Unfortunately, over 10,000,000 of them were manufactured with fatal design flaws leading to hardware failure among other unpleasant outcomes. If a red light suddenly appears, you are being informed that your machine has developed a problem which must be dealt with.

Your console has trouble shooting or warning indicator lights to help you diagnose problems. If one red light is on it indicates a hardware problem that you need to look for. Two red lights means the device is overheating and you should turn it off and possibly relocate it to improve ventilation. Three red rings of light are known as red rings of death and require your immediate attention. Four red lights means you have a fault in the cable and you should check it and replace it if necessary.

If your warranty period is expired and you want 3 red rings of death fix, you need to either send your console directly to Microsoft or you need to do the task yourself. If you choose to get red ring of death fixed by Microsoft, you need to ship your console to Microsoft and further you will need to send $140. The major disadvantage of sending your console to Microsoft is that you will have to wait for over a month to get back your gaming console.

There is another option which may be best for you in learning to fix red ring of death yourself. DIY (do it yourself) is a guide which is ready to purchase and is also a very low price and you will be able to learn how to fix 3 red circles of death - doom within a time frame of one and a half hour. The easy steps are: Remove the case; Take off the x clamp; Take the screw off and remove the heat sink; Make sure to clear the CPU and GPU; Put a bit of heat compound on the GPU; Place two nylon washers on top and on bottom of where the screws go back into the heat sink; then screw the heat sink back on; Finally put everything back together.

The main advantages of DIY (do-it-yourself) guides is that the steps are easy to follow. You will be able to repair your gaming console and troubleshoot hardware problems that include the "red light of death." A red light usually indicates a failure of some kind. You will not need to ship your gaming console to Microsoft for costly repairs once you have learned the safe and easy way to perform home repairs.

If your X-box is showing you the dreaded 3 rings of light, you have cause to be greatly concerned. There are several easy approaches to a so-called "three red rings of death fix" which may be necessary for many X-box 360 devices. Unfortunately, over ten million of them were manufactured with fatal design flaws leading to hardware failure among other unpleasant outcomes. The cheapest choice you have is to fix it yourself. A do it yourself guide can be purchased inexpensively and by following the instructions, you can fix the three 3 red circles of death in about an hour and a half.