Car restoration is one activity that will leave you with an extreme sense of accomplishment. It is a hobby that requires dedication, time and money. Fords and Chevy's are the two models that are the easiest to begin with as parts are more readily available.

Prior to any car restoration you will need to prepare your shop for the the task. Collect the materials needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off now rather than later. When it is time to take the car apart you need to know what needs to be replaced and what needs to be repaired. With this type of organization you will make sure you are not wasting parts during the car restoration process.

Take inventory of the parts as you remove them by separating them into two individual cartons labeled repair and replace. Take pictures of them as you do this getting a picture of what the car looks like with them on and off. This method will also aid you in figuring how much the cost will be and how long it will take you to finish the project.

Once you have all the parts removed you can begin the cleaning process. The cleaning process of the car restoration entails the car be reduced to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest and fastest way is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

Now you will see the damage to the car once it's stripped. You may find rust holes, damaged floorboards, and dents. But do not despair! Even if the car didn't look bad when you purchased it you must realize that this car has had a been through many miles life. You want to extend it's life right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.

It is time to repair all those dents, holes, and other areas to get set for sanding. You will use several grades of sandpaper throughout the sanding procedure beginning with 36 to 80. Once you have completed this step you are now ready to apply the glazing. Begin with 220 wet grit sandpaper and go on to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also offer a preventative measure against scratches.

Your car restoration is complete! You are now ready to show off your beautiful car to the neighborhood with well earned pride.

For All The Essential Information On Car Restoration go to: Classic Car Restoration